Auto Align Beam Detector is an auto-aligning, self-correcting infrared beam smoke detector. Up to 2 detector heads can report to a single ground level controller. In addition, each system controller houses two pairs of fire and trouble relays, one per detector. Once the detector head is installed, using the easy fit mounting system an integral LASER can be activated. This allows the reflective prism to be located quickly and with confidence.

Features
Up to 2 Detector Heads reporting to One Ground Level Controller
Programmable Fault and Alarm delay: 2-30 Seconds

Primary Input Power: 14 to 36 V DC
Standby Low Current: 5 mA to 8.5 mA @ 24 V DC
(Depending On Number Of Detector Heads)
High Current: 37 mA @ 24 V DC
Alarm Current: 5 mA to 8.5 mA @ 24 V DC depending on a number of detector heads used
Relay Contacts: 1 A @ 30 V DC Resistive
Reset Time: 5 seconds maximum
Start Up Time: 45 seconds
Optical Wavelength: 850 nm
Temperature Rating UL Listed: 0°C to 38°C
Primary Input Power: 14 to 36 V DC
Dimension: (W x H x L) & Weight
Head: 134 mm x 134 mm x 131 mm, 1470 g
Controller: 202 mm x 87 mm x 230 mm, 1470 g
Prism: 100 mm x 9.5 mm x 105 mm

QR Code