Manual call point is innovation manual call point (MCP) it is non-addressable. It alarms by the current caused by pressing the action plate. It can be simply connected to compatible conventional fire alarm system from various manufacturers. This MCP is suitable for public places. When there is fire, pressing the action plate on this MCP can send alarm signal to compatible conventional fire alarm control panel.

Features:

Alarming by pressing, reset by a special key
Plug-in structure.
Designed to comply with EN 54-11.

Specification:

Operating Voltage: 24VDC (12VDC~28VDC)
Standby Current: 0mA
Alarm Current: ≤30mA(equivalent resistance is 470Ω/1W)
Indicator: Red. Illuminates after alarming.
Type of Initiating Part: Reusable
Initiating Mode: Pressing the action plate manually
Resuming Mode: Manually resumed by a special key
Wiring: Two-wire
Class: Type A, indoor use
Ingress Protection Rating: IP43
Ambient Temperature: -10°C～+55°C
Relative Humidity: ≤95%, non condensing
Material of Enclosure: ABS
Dimension (L×W×H): 87.1mm×87.1mm×58mm (with back box) :: 87.1mm×87.1mm×23mm (without back box)
Mounting Hole Distance: 60mm
Weight: About 160g (with back box)::About 107g (without back box)/td>

QR Code